Keilton+autani · Sensors
EFS106
High-Bay Sensor with AUX Interface (12 V DC)
Low-voltage high-bay sensor for LLLC/NLC5 – PIR + daylight, 6 to 12 m mounting height, plug-and-play.
DetailsRetrofit
Your luminaires stay.
The intelligence is added.
You do not have to replace working LED luminaires to control them intelligently. If the driver has a 0-10 V or DALI interface, we retrofit sensors and lighting management directly to the existing luminaire – no new control wiring, during operation.
Requirement
Does it fit your luminaires?
What matters is the LED driver in the luminaire. You will find the details on the rating plate or in the driver datasheet – or send us a photo and we will check it.
| Your driver | How we retrofit |
|---|---|
| Dimmable 0-10 V, 12 V auxiliary output (AUX) and dim-to-off | Sensor directly on the luminaire: EFS106 in halls, IFS105SE in offices, or FA102 node with MWS105E sensor |
| Dimmable 0-10 V without 12 V output – hall, 6 to 15 m | EFS104 with its own power supply (230 V) and relay |
| Dimmable 0-10 V without 12 V output – office, corridor | We check the luminaire; a driver swap is often cheaper than a new luminaire |
| Dimmable DALI | Sensors with DALI connection on the existing luminaire – we match the components to your drivers |
| Not dimmable or still fluorescent | LED upgrade first, with sensors planned at the same time |
The interfaces are explained in Retrofitting lighting controls.
Process
How a retrofit works.
Site survey
We record luminaires, drivers, heights and use on site.
Planning & preview
Sensor grid and zones in Sensora – you see the result in 3D.
Learn moreInstallation in operation
Our team installs area by area, without new wiring.
App & monitoring
Set-up in the app, handover with analysis in the AU-Manager.
Result
What a retrofit delivers.
Where luminaires are already LED, the biggest saving lies in the control: light only where someone is, and only as bright as daylight requires. As a guide from our projects, sensors alone save more than 60 % of lighting electricity.
- Keep working luminaires
- Automatic lighting control as required by EPBD Article 13
- Occupancy and energy data per zone
- Expandable later, e.g. wall switches or outdoor areas
Components
Sensors for retrofit
Keilton+autani · Sensors
EFS106W
Rugged IP66 High-Bay Sensor with AUX Interface
Weatherproof high-bay sensor (IP66) in a UV-resistant black housing – for outdoor use, damp locations and 6 to 12 m height.
DetailsKeilton+autani · Sensors
EFS104
High-Bay Sensor with Integrated Power Supply (120–277 V AC)
PIR high-bay sensor and controller with power supply for 6 to 15 m mounting height – relay up to 6 A plus 0-10 V dimming.
Details
Keilton+autani · Sensors
IFS105SE
Round Indoor Sensor for LLLC
Compact Bluetooth luminaire sensor with PIR and daylight harvesting – turns standard luminaires into smart ones (up to approx. 5.5 m).
DetailsKeilton+autani · Controller & Gateways
FA102
Bluetooth Node for Luminaires (LLLC)
Miniature Bluetooth node for luminaire integration – 0-10 V dimming, sensor-ready for Eco sensors.
Details
Keilton+autani · Sensors
MWS105E
Integrated 12 V Eco Microwave Sensor
Microwave presence sensor with adjustable sensitivity (0–100 %) – detection 6 to 12 m, mounting 2.4 to 6 m.
DetailsNo results – start the sensor finder.
FAQ
Frequently asked questions about retrofit
Can lighting control be retrofitted without replacing luminaires?
Yes, if the existing LED luminaires have a dimmable driver with a 0-10 V or DALI interface. The sensor is mounted on or in the luminaire and dims the driver directly; networking runs via Bluetooth Mesh.
How do I know whether my driver fits?
From the rating plate or the driver datasheet: look for a 0-10 V or DALI dimming input; for 0-10 V ideally with a 12 V auxiliary output (AUX) and dim-to-off. Send us a photo of the rating plate – we check it free of charge.
What if the driver has no 12 V output?
In halls from 6 m we use the EFS104: it has its own power supply, switches via a relay and dims via 0-10 V. In offices and corridors we check the luminaire; a driver swap is often the cheapest solution.
Who installs the sensors?
Usually we do: Building Robotics Europe handles survey, planning, installation and commissioning from one source – during operation, area by area. If you prefer your own electrical contractor to install, that is fine too.
Free check
Send us a photo of your driver.
We will tell you whether and how your existing luminaires can be retrofitted – with a sensor proposal and savings estimate.