Keilton+autani · Sensors
EFS106
High-Bay Sensor with AUX Interface (12 V DC)
Low-voltage high-bay sensor for LLLC/NLC5 – PIR + daylight, 6 to 12 m mounting height, plug-and-play.
DetailsSmart lighting · Sensors · Lighting management
Buildings that sense
when light is needed.
Presence, daylight and high-bay sensors with app-based lighting management – also retrofitted to your existing LED luminaires, no new control cabling. As a guide value from our projects, sensors alone save more than 60 % of lighting electricity, up to 75 % in rarely used areas.
75 %Savings potential from sensors
15 mMax. high-bay mounting height
10+Years of experience
Reality check
Are your lights on
where nobody is?
In halls, corridors and warehouses, LED luminaires often light empty areas for hours. That costs money every day – and above 70 kW, automatic lighting control is mandatory in Germany.
Power without benefit
Lights stay on although people are only there some of the time. As a guide value from our projects, sensors alone save more than 60 %.
Learn moreMandatory by 31 Dec 2029
§ 56 GModG requires automatic lighting control for non-residential buildings above 70 kW. New luminaires are not needed for this.
Learn moreNo evidence
Without measured data there is no evidence for energy audits, ESG reports and building automation. With the AU-Manager, monitoring is always included.
Sensor portfolio
Sensors for every ceiling height.
From battery-powered ceiling sensors to IP66 high-bay sensors – every product with technical data and datasheet.
Keilton+autani · Sensors
EFS107E
12 V Dual-Tech Ceiling Sensor (PIR + Ultrasonic)
Dual-tech presence detector with PIR and ultrasonic – high accuracy for rooms up to 56 m², incl. daylight control.
Details
Keilton+autani · Sensors
BCS107
Battery-Powered Bluetooth Ceiling Sensor
Wireless PIR presence detector with daylight harvesting – up to 10 years of battery life, ideal for retrofits.
Details
Keilton+autani · Sensors
EFS106W
Rugged IP66 High-Bay Sensor with AUX Interface
Weatherproof high-bay sensor (IP66) in a UV-resistant black housing – for outdoor use, damp locations and 6 to 12 m height.
DetailsNo results – start the sensor finder.
Retrofit
Your luminaires stay.
The intelligence is added.
Working LED luminaires do not have to go to become smart. If the driver has a 0-10 V or DALI interface, we fit the sensor directly to the existing luminaire and network everything wirelessly. We usually handle survey, installation and commissioning ourselves – during operation; your own electrical contractor can install if you prefer.
- Keep existing luminaires
- No new control wiring
- App-based lighting management, monitoring included
Everything from one source
One contact.
From survey to monitoring.
Site survey
We record luminaires, drivers, heights and usage on site.
Planning in Sensora
Sensors and zones planned in 3D – you see the result in advance.
Learn moreInstallation during operation
Usually by us, or by your own electrical contractor if you prefer.
App & monitoring
Set-up via app, consumption and occupancy in the AU-Manager.
The difference
Why not just buy
cheap motion sensors?
A DIY-store detector switches lights on and off – nothing more. For modern building management it lacks almost everything that matters.
Cheap standalone sensor
It switches – that's it.
Low unit price, high follow-up costs
- No energy monitoring – savings can neither be measured nor proven
- No communication between sensors – every sensor is an island
- On/off only: no dimming, no daylight harvesting, no task tuning
- Every change to time delay or sensitivity means a ladder and a technician on site
- No BMS integration, no occupancy data, no fault alerts
Networked sensors
Measure, communicate, optimise.
Bluetooth Mesh · energy monitoring · BACnet
- Energy use per zone every 15 minutes – savings documented for reporting & audits
- Sensors talk to each other via Bluetooth Mesh: groups, orientation light, scenes
- Dimming, daylight harvesting, task tuning and schedules – the big savings levers
- Configuration & firmware updates via app or platform – no ladder required
- BMS integration via BACnet, Modbus or API, occupancy data & maintenance alerts
Sensora · exclusive to Building Robotics
Experience your building
before installation.
With our own software Sensora, your floor plan becomes a 3D building – and you see live how the light reacts to movement.
Locations
Lighting control near you.
Across Germany, Austria and the EU – one contact.
Knowledge
Questions we hear every day.
Economics8 min
GEG, EnEfG & EPBD: what German law means for lighting control
GModG replacing the GEG, EnEfG and the EU EPBD: which lighting control duties apply to non-residential buildings, key deadlines and available funding.
Read moreEconomics7 min
Lighting Control in Let Commercial Buildings: Who Pays, Can Landlords Pass On Costs?
Who pays for lighting control in a let commercial building? Owner's duty, toleration under §§ 555a ff. BGB, no levy under § 559 BGB, operating costs only by contract.
Read moreEconomics7 min
What Does a Lighting Control System Cost? Cost Factors Explained
The cost of lighting control depends on luminaire count, drivers, mounting height, wireless or wired and commissioning. How to get a reliable quote.
Read moreFundamentals8 min
Office Lights Keep Turning Off: Causes and Solutions
Office lights turning off while people sit at their desks? The most common causes, from motion detectors to PIR blind spots – and what fixes the problem for good.
Read morePlanning7 min
Reading the LED Driver Label: Is My Luminaire Dimmable?
DA/DA, DIM+/DIM−, 0–10 V or AUX 12 V: how to read your LED driver's label and tell whether the luminaire can be retrofitted with sensors.
Read morePlanning7 min
Retrofitting Lighting Controls in Existing Buildings – Without New Cables
Lighting control retrofit without new control cables: how in-luminaire sensors, Bluetooth nodes and battery-powered devices make existing buildings efficient.
Read moreNo matching articles found.
FAQ
Frequently asked questions
Do I have to replace my luminaires to get lighting control?
No. If your LED luminaires have a dimmable 0-10 V or DALI driver, we retrofit sensors and lighting management directly to the existing luminaires – without new control cables. Details under Retrofit.
Am I affected by the § 56 GModG obligation?
Non-residential buildings in Germany with a heating, air-conditioning or combined ventilation system above 70 kW need automatic lighting control by 31 Dec 2029. General information, not legal advice.
How much does lighting control save?
As a guide value from our projects, sensors on existing LED luminaires save more than 60 % of lighting electricity, up to 75 % in rarely used areas. Estimate your figures in the savings calculator.
Who does the installation?
Usually we do: survey, planning, installation and commissioning from one source, during operation. If you prefer your own electrical contractor, that is possible too.
How long does implementation take?
It depends on the number of luminaires and access. As no cables are pulled, installation per luminaire is quick and operations continue. You receive a schedule with the proposal.
Free initial consultation
Three clicks. Done.
Tell us briefly what you need. We get back to you with a suitable proposal.